交换机A和交换机B之间通过3条GE以太网连接，活动链路为2，配置如下：SwitchA配置<HUAWEI> system-view[HUAWEI] sysname SwitchA[SwitchA] in
.
交换机A和交换机B之间通过3条GE以太网连接，活动链路为2，配置如下：
- SwitchA配置
<HUAWEI> system-view[HUAWEI] sysname SwitchA[SwitchA] interface eth-trunk 1 # 创建Eth-Trunk1[SwitchA-Eth-Trunk1] mode lacp # 配置LACP模式[SwitchA-Eth-Trunk1] trunkport gigabtiethernet 0/0/1 to 0/0/3 # 添加接口成员[SwitchA-Eth-Trunk1] max active-linknumber 2 # 设置活动上限阀值[SwitchA-Eth-Trunk1] quit[SwitchA] lacp priority 100 # 配置系统优先级使其成为主控端[SwitchA] interface gigabitethernet 0/0/1[SwitchA-GigabitEthernet0/0/1] lacp priority 100 # 配置活动链路优先级[SwitchA-GigabitEthernet0/0/1] quit[SwitchA] interface gigabitethernet 0/0/2[SwitchA-GigabitEthernet0/0/2] lacp priority 100 # 配置活动链路优先级[SwitchA-GigabitEthernet0/0/2] quit- SwitchB配置
<HUAWEI> system-view[HUAWEI] sysname SwitchB[SwitchB] interface eth-trunk 1 # 创建Eth-Trunk1[SwitchB-Eth-Trunk1] mode lacp # 配置LACP模式[SwitchB-Eth-Trunk1] trunkport gigabtiethernet 0/0/1 to 0/0/3 # 添加接口成员[SwitchB-Eth-Trunk1] max active-linknumber 2 # 设置活动上限阀值[SwitchB-Eth-Trunk1] quit[SwitchB] interface gigabitethernet 0/0/1[SwitchB-GigabitEthernet0/0/1] lacp priority 100 # 配置活动链路优先级[SwitchB-GigabitEthernet0/0/1] quit[SwitchB] interface gigabitethernet 0/0/2[SwitchB-GigabitEthernet0/0/2] lacp priority 100 # 配置活动链路优先级[SwitchB-GigabitEthernet0/0/2] quit说明： LACP优先级值越大，优先级越低，系统LACP优先级为32768
.