fw1:interfaceGigabitEthernet0/0/0ip address 192.168.1.2 255.255.255.0hrp track masterinterfaceGigabi
.
 fw1: interfaceGigabitEthernet0/0/0 ip address 192.168.1.2 255.255.255.0 hrp track master interfaceGigabitEthernet0/0/1 ip address 202.100.1.1 255.255.255.0 hrp track master hrp mirror sessionenable hrp enable hrp ospf-costadjust-enable hrp interfaceGigabitEthernet0/0/2 ip-link check enable ip-link 1destination 100.100.100.100 interface g0/0/1 mode icmp hrp track ip-link 1master fw2: interfaceGigabitEthernet0/0/0 ip address 192.168.2.2 255.255.255.0 hrp track slave interfaceGigabitEthernet0/0/1 ip address 202.100.2.1 255.255.255.0 hrp track slave hrp mirror sessionenable hrp enable hrp ospf-costadjust-enable hrp interfaceGigabitEthernet0/0/2 ip-link check enable ip-link 1destination 100.100.100.100 interface g0/0/1 mode icmp hrp track ip-link 1salve ----------------------------------------------------------------------------------------- 查看HRP状态： HRP_M[FW1]dis hrpstate 09:49:06 2014/07/24 The firewall's config state is: MASTER Current state of interfaces tracked by master: GigabitEthernet0/0/0 : up GigabitEthernet0/0/1 : up HRP_S[FW2]dis hrpstate 09:49:27 2014/07/24 The firewall's config state is: SLAVE Current state of interfaces tracked by slave: GigabitEthernet0/0/0 : up GigabitEthernet0/0/1 : up -------------------------------------------------------------------------------------------------- 查看ip-link状态： HRP_M[FW1]disip-link 09:38:14 2014/07/24 num state timer***-instance ip-address interface-name mode vgmp next-hop 1 up 3 100.100.100.100GE0/0/1 icmp master HRP_S[FW2]disip-link 09:38:21 2014/07/24 num state timer***-instance ip-address interface-name mode vgmp next-hop 1 up 3 100.100.100.100 GE0/0/1 icmp slave ---------------------------------------------------------------------------------------------------------------- 当服fw1的G0/0/1或G0/0/0失效后，hrp主备切换。 HRP_M[FW1]intg0/0/1 HRP_M[FW1-GigabitEthernet0/0/1]shutdown HRP_S[FW1-GigabitEthernet0/0/1]dis hrp state 10:30:25 2014/07/24 The firewall's config state is: SLAVE Current state of interfaces tracked by master: GigabitEthernet0/0/0 : up GigabitEthernet0/0/1 : down HRP_M[FW2]display hrp state 10:30:56 2014/07/24 The firewall's config state is: MASTER Current state of interfaces tracked by slave: GigabitEthernet0/0/0 : up GigabitEthernet0/0/1 : up ---------------------------------------------------------------------------------- 当到达outside路由器100.100.100.100地址失效后，ip-link检查失效，hrp主备切换。 [Outside-LoopBack0]intg0/0/0 [Outside-GigabitEthernet0/0/0]shutdown （到达100.100.100.100不通，ip-link检查失效） HRP_S[FW1]display hrp state 10:34:28 2014/07/24 The firewall's config state is: SLAVE Current state of interfaces tracked by master: GigabitEthernet0/0/0 : up GigabitEthernet0/0/1 : up HRP_M[FW2]display hrp state 10:34:46 2014/07/24 The firewall's config state is: MASTER Current state of interfaces tracked by slave: GigabitEthernet0/0/0 : up GigabitEthernet0/0/1 : up HRP_S[FW1]dis ip-link 11:06:44 2014/07/24 num state timer***-instance ip-address interface-name mode vgmp next-hop 1 down 3 100.100.100.100 GE0/0/1 icmp master HRP_M[FW2]dis ip-link 11:07:03 2014/07/24 num state timer***-instance ip-address interface-name mode vgmp next-hop 1 up 3 100.100.100.100 GE0/0/1 icmp slave |
