[LSW1]interface Ethernet 0/0/1[LSW1-Ethernet0/0/1]stp disable （关闭stp）[LSW1]interface Ethernet 0/0/2[
.
[LSW1]interface Ethernet 0/0/1[LSW1-Ethernet0/0/1]stp disable （关闭stp）[LSW1]interface Ethernet 0/0/2[LSW1-Ethernet0/0/1]stp disable （关闭stp）[LSW1]smart-link group 1[LSW1-smlk-group1]smart-link enable [LSW1-smlk-group1]port Ethernet 0/0/1 master （主）[LSW1-smlk-group1]port Ethernet 0/0/2 slave （备）[LSW1]smart-link group 1[LSW1-smlk-group1]display this #smart-link group 1 port Ethernet0/0/1 master port Ethernet0/0/2 slave[LSW1]display smart-link group 1Smart Link group 1 information : Smart Link group was disabled There is no Load-Balance There is no protected-vlan reference-instance DeviceID: 4c1f-cce8-159f Member Role State Flush Count Last-Flush-Time ---------------------------------------------------------------------- Ethernet0/0/1 Master Unknown 0 0000/00/00 00:00:00 UTC+00:00 Ethernet0/0/2 Slave Unknown 0 0000/00/00 00:00:00 UTC+00:00 [LSW2]interface Ethernet 0/0/1[LSW2-Ethernet0/0/1]shutdown [LSW1]display smart-link group 1Smart Link group 1 information : Smart Link group was enabled There is no Load-Balance There is no protected-vlan reference-instance DeviceID: 4c1f-cce8-159f Member Role State Flush Count Last-Flush-Time ---------------------------------------------------------------------- Ethernet0/0/1 Master Inactive 0 0000/00/00 00:00:00 UTC+00:00 Ethernet0/0/2 Slave Active 0 0000/00/00 00:00:00 UTC+00:00 [LSW1]display smart-link group 1Smart Link group 1 information : Smart Link group was enabled There is no Load-Balance There is no protected-vlan reference-instance DeviceID: 4c1f-cce8-159f Member Role State Flush Count Last-Flush-Time ---------------------------------------------------------------------- Ethernet0/0/1 Master Inactive 0 0000/00/00 00:00:00 UTC+00:00 Ethernet0/0/2 Slave Active 0 0000/00/00 00:00:00 UTC+00:00 [LSW2-Ethernet0/0/1]undo shutdown 配置回切[LSW1]smart-link group 1[LSW1-smlk-group1]restore enable 开启回切功能[LSW1-smlk-group1]timer wtr 30 设置时间，默认是60秒[LSW1]display smart-link group 1Smart Link group 1 information : Smart Link group was enabled Wtr-time is: 30 sec. There is no Load-Balance There is no protected-vlan reference-instance DeviceID: 4c1f-cce8-159f Member Role State Flush Count Last-Flush-Time ---------------------------------------------------------------------- Ethernet0/0/1 Master Active 0 0000/00/00 00:00:00 UTC+00:00 Ethernet0/0/2 Slave Inactive 0 0000/00/00 00:00:00 UTC+00:00 [LSW2-Ethernet0/0/1]shutdown[LSW1]display smart-link group 1Smart Link group 1 information : Smart Link group was enabled Wtr-time is: 30 sec. There is no Load-Balance There is no protected-vlan reference-instance DeviceID: 4c1f-cce8-159f Member Role State Flush Count Last-Flush-Time ---------------------------------------------------------------------- Ethernet0/0/1 Master Inactive 0 0000/00/00 00:00:00 UTC+00:00 Ethernet0/0/2 Slave Active 0 0000/00/00 00:00:00 UTC+00:00 [LSW2-Ethernet0/0/2]shutdown[LSW1]display smart-link group 1Smart Link group 1 information : Smart Link group was enabled Wtr-time is: 30 sec. There is no Load-Balance There is no protected-vlan reference-instance DeviceID: 4c1f-cce8-159f Member Role State Flush Count Last-Flush-Time ---------------------------------------------------------------------- Ethernet0/0/1 Master Active 0 0000/00/00 00:00:00 UTC+00:00 Ethernet0/0/2 Slave Inactive 0 0000/00/00 00:00:00 UTC+00:00 监控链路状态[LSW2]monitor-link group 1[LSW2-mtlk-group1]port Ethernet 0/0/2 ? downlink Set this port as downlink uplink Set this port as uplink[LSW2-mtlk-group1]port Ethernet 0/0/2 uplink [LSW2-mtlk-group1]port Ethernet 0/0/1 downlink 