1.配置接口ipr1配置接口ip[r1] interface GigabitEthernet0/0/0[r1-GigabitEthernet0/0/0] ip address 192.168.1.1
.
1.配置接口ip
r1配置接口ip
[r1] interface GigabitEthernet0/0/0
[r1-GigabitEthernet0/0/0] ip address 192.168.1.1 255.255.255.0
r2配置接口ip
[r2]interface GigabitEthernet 0/0/0
[r2-GigabitEthernet0/0/0]ip address 192.168.1.2 24
查看配置的接口ip命令 display ip interface brief
2.R2上配置远程登录
[R2]user-interface vty 0 4
[R2-ui-vty0-4]authentication-mode aaa
[R2-ui-vty0-4]quit
[R2]aaa
[R2-aaa]local-user admin1 password cipher huawei
[R2-aaa]local-user admin1 privilege level 2
[R2-aaa]local-user admin1 service-type telnet 定义用户的服务类别
[R2-aaa]quit
3.在R1上telnet登录R2
<r1>telnet 192.168.1.2
