实验拓扑图1，配置sw1交换机<Huawei>sys ##进入系统视图模式Enter system view, return user view with Ctrl+Z.[Huawei]sys

.

实验拓扑图

1，配置sw1交换机

<Huawei>sys    ##进入系统视图模式Enter system view, return user view with Ctrl+Z.[Huawei]sys sw1     ##修改名字[sw1]vlan batch 10 20   ##创建vlan10 20 [sw1]int e0/0/1     ##进入接口[sw1-Ethernet0/0/1]port link-type access   ##设置access [sw1-Ethernet0/0/1]port default vlan 10     ##将接口放到vlan10 中[sw1-Ethernet0/0/1]q[sw1]int e0/0/2[sw1-Ethernet0/0/2]p l a[sw1-Ethernet0/0/2]p d v 20[sw1-Ethernet0/0/2]int g0/0/1[sw1-GigabitEthernet0/0/1]p l t      ##设置trunk链路[sw1-GigabitEthernet0/0/1]p t a v a  ##将所有vlan放到接口中

2，配置R1路由器

<Huawei>sysEnter system view, return user view with Ctrl+Z.[Huawei]sys R1[R1]int g0/0/0.10       ##进入逻辑子接口中[R1-GigabitEthernet0/0/0.10]dot1q termination vid 10  ##封装dot1q协议，该子接口对应vlan10[R1-GigabitEthernet0/0/0.10]ip add 192.168.10.1 24   ##设置网关[R1-GigabitEthernet0/0/0.10]arp broadcast enable     ##开启广播[R1-GigabitEthernet0/0/0.10]interface g0/0/0.20[R1-GigabitEthernet0/0/0.20]d t v 20[R1-GigabitEthernet0/0/0.20]ip address 192.168.20.1 24[R1-GigabitEthernet0/0/0.20]arp b e

3，设置pc机的ip地址

4，测试互通性

谢谢阅读！

.