1、配置好VLAN和VLAN的IP地址2、在vlan端口下配置VRRP[HW-SW1] int vlan 8 //进入vlan8的接口[HW-SW1-vlanIf] vrrp vrid 8 virt
.
1、配置好VLAN和VLAN的IP地址
2、在vlan端口下配置VRRP
[HW-SW1] int vlan 8 //进入vlan8的接口
[HW-SW1-vlanIf] vrrp vrid 8 virtual-ip 10.1.10.14 //配置VRRP的虚拟网关地址
[HW-SW1-vlanIf] vrrp vrid 8 priority 105 //配置VRRP的优先级，1-254，越大越优先，大的为Master，小的为Backup
验证：
[HW-SW1-Vlanif8]dis vrrp brief
VRID State Interface Type Virtual IP
----------------------------------------------------------------
8 Master Vlanif8 Normal 10.1.10.14
9 Master Vlanif9 Normal 10.1.10.30
10 Master Vlanif10 Normal 10.1.10.46
----------------------------------------------------------------
Total:3 Master:3 Backup:0 Non-active:0
