1、创建RIP进程并进入RIP视图 [Router] rip [ process-id ]2、在指定网段接口上使能RIP [Router-rip-1] network network-address
.
1、创建RIP进程并进入RIP视图
.[Router] rip [ process-id ]
.2、在指定网段接口上使能RIP
.[Router-rip-1] network network-address [ wildcard-mask ]
.3、配置接口工作在抑制状态
.[Router-rip-1] silent-interface { interface-type interface-number | all }
.4、使能RIP水平分割功能
.[Router-Ethernet1/0] rip split-horizon
.5、使能RIP毒性逆转功能
.[Router-Ethernet1/0] rip poison-reverse
.6、指定全局RIP版本
.[Router-rip-1] version { 1 | 2 }
.7、关闭RIPv2自动路由聚合功能
.[Router-rip-1] undo summary
.8、配置RIPv2报文的认证
.[Router-Ethernet1/0] rip authentication-mode { md5 { rfc2082 { cipher cipher-string | plain plain-string } key-id | rfc2453 { cipher cipher-string | plain plain-string } } | simple { cipher cipher-string | plain plain-string } }
..