拓扑图S5700作为核心设备，配置DHCP，为办公网络分配IP地址S2700作为接入设备S5700配置vlan 100description bangonginterface GigabitEther
.
拓扑图
S5700作为核心设备，配置DHCP，为办公网络分配IP地址
S2700作为接入设备
S5700配置
vlan 100
description bangong
interface GigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass vlan 100
interface Vlanif100
ip address 192.168.10.254 255.255.255.0
S2700配置
vlan 100
description bangong
interface Ethernet0/0/1
port link-type trunk
port trunk allow-pass vlan 100
interface Ethernet0/0/2
port link-type access
port default vlan 100
interface Ethernet0/0/3
port link-type access
port default vlan 100
interface Ethernet0/0/4
port link-type access
port default vlan 100
开启DHCP
dhcp enable
配置地址池，并做静态绑定，PC1只能获取到192.168.10.1 PC2只能获取到192.168.10.2 剩余地址保留，不做分配，防止外部人员接入。
ip pool bangong
gateway-list 192.168.10.254
network 192.168.10.0 mask 255.255.255.0
static-bind ip-address 192.168.10.1 mac-address 5489-98e7-7f28
static-bind ip-address 192.168.10.2 mac-address 5489-98d8-4d8c
excluded-ip-address 192.168.10.3 192.168.10.253
dns-list 8.8.8.8
在虚接口下启用全局dhcp
interface Vlanif100
ip address 192.168.10.254 255.255.255.0
dhcp select global
在PC上验证分配的地址
PC1
PC2
我们断开PC2网线，假设PC2没有接入，验证PC3是否能获取DHCP分配给PC2的地址
