mininet-3所需安装套件：sudo apt-get install bridge utils 基本指令： brctl addbr br0 新增bridge(brctl = bridg
.
mininet-3
所需安装套件：sudo apt-get install bridge utils
基本指令： brctl addbr br0 新增bridge(brctl = bridge control) brctl addif br0 eth0 把目前的哪一个介面加入到桥接器(addif = add interface)
拓朴图：
#!/usr/bin/env pythonfrom mininet.cli import CLIfrom mininet.net import Mininetfrom mininet.link import Link,TCLinkif '__main__' == __name__ : net = Mininet(link=TCLink) h1 = net.addHost('h1', ip="192.168.10.1/24", mac="00:00:00:00:00:01") h2 = net.addHost('h2', ip="192.168.10.2/24", mac="00:00:00:00:00:02") h3 = net.addHost('h3', ip="192.168.20.1/24", mac="00:00:00:00:00:03") r0 = net.addHost('r0') s0 = net.addHost('s0') net.addLink(h1,s0) net.addLink(h2,s0) net.addLink(s0,r0) net.addLink(r0,h3) net.build() r0.cmd("echo 1 > /proc/sys/net/ipv4/ip_forward") r0.cmd('ifconfig r0-eth0 192.168.10.254 netmask 255.255.255.0') r0.cmd('ifconfig ro-eth1 192.168.20.254 netmask 255.255.255.0') h1.cmd("ip route add default via 192.168.10.254 dev h1-eth0") h2.cmd("ip rotue add default via 192.168.10.254 dev h2-eth0") h3.cmd("ip route add default via 192.168.20.254 dev h3-eth0") s0.cmd("brctl addbr br0") s0.cmd("brctl addif br0 s0-eth0") s0.cmd("brctl addif br0 s0-eth1") s0.cmd("brctl addif br0 s0-eth2") s0.cmd("ifconfig br0 up") CLI(net) net.stop()提醒
echo 1 > /proc/sys/net/ipv4/ip_forward启动路由功能ip rotue add default via 192.168.10.254 dev h2-eth0设定内定路由器
执行结果
parallels@parallels-vm:~/Desktop/shell$ sudo python test2.py mininet> neth1 h1-eth0:s0-eth0h2 h2-eth0:s0-eth1h3 h3-eth0:r0-eth1r0 r0-eth0:s0-eth2 r0-eth1:h3-eth0s0 s0-eth0:h1-eth0 s0-eth1:h2-eth0 s0-eth2:r0-eth0mininet> nodesavailable nodes are: h1 h2 h3 r0 s0mininet> linksh1-eth0<->s0-eth0 (OK OK) h2-eth0<->s0-eth1 (OK OK) s0-eth2<->r0-eth0 (OK OK) r0-eth1<->h3-eth0 (OK OK) xterm s0 打开switch便可以看到上面所设定的br0
