实训目的了解聚星云中交换机的硬开关机。实训背景在聚星云中，交换机、路由器、PC都可以由用户自主进行硬开关机。用户可以看到最初的启动信息。操作起来感觉和真机完全一致。实训拓扑实验所需设备：设备类型设备型
.
实训目的
- 了解聚星云中交换机的硬开关机。
实训背景
在聚星云中，交换机、路由器、PC都可以由用户自主进行硬开关机。用户可以看到最初的启动信息。操作起来感觉和真机完全一致。
实训拓扑
实验所需设备：
| 设备类型 | 设备型号 | 数量 |
|---|---|---|
| 二层交换机 | S3760 | 1 |
实训步骤
步骤1：在SW1上点鼠标右键，选择“开机”
SW1启动时是这样的：
System bootstrap ...Nor Flash ID: 0x00010049, SIZE: 2097152BytesPress Ctrl+B to enter Boot Menu ......Load Ctrl Program ...Load CTRL with ECC......Executing program, launch at: 0x01000000Ctrl Version: RGOS 10.3(5b1), Release(84107)MTD_DRIVER-5-MTD_NAND_FOUND: 1 NAND chips(chip size : 33554432) detectedPress Ctrl+C to enter Ctrl Menu ......Main Program File Name rgos.bin, Load Main Program ...SW1启动完毕后是这样的：
Executing program, launch at: 0x00010000Ruijie General Operating System SoftwareRelease Software (tm), RGOS 10.3(5b1), Release(84107), Compiled Wed May 5 12:08:00 CST 2010 by ngcf61Copyright (c) 1998-2010s by Ruijie Networks.All Rights Reserved.Decompiling or Reverse Engineering is Not Allowed.*Oct 15 03:01:15: %MTD_DRIVER-5-MTD_NAND_FOUND: 1 NAND chips(chip size : 33554432) detected*Oct 15 03:01:30: %DEVICE-5-CHANGED: Device S3760-48 (1) changed state to up.*Oct 15 03:01:46: %SYS-5-COLDSTART: System coldstart.步骤2：在SW1上点鼠标右键，选择“关机”。
此时Console不接受响应。
.