拓扑图配置代码fw1（防火墙配置：）--------------------------sysint g0/0/1ip address 10.0.0.2 24int g0/0/2ip address
.
拓扑图
配置代码
fw1（防火墙配置：）--------------------------
sys
int g0/0/1
ip address 10.0.0.2 24
int g0/0/2
ip address 192.168.100.254 24
int g0/0/3
ip add 200.0.10.1 24
quit
(将端口加入相应区域)
firewall zone trust
add interface g0/0/1
quit
firewall zone dmz
add interface GigabitEthernet 0/0/2
quit
firewall zone untrust
add interface GigabitEthernet 0/0/3
quit
（允许区域1到区域2的数据通过 display firewall packet-filter default all 可查看 ）
firewall packet-filter default permit interzone trust untrust direction outbound
firewall packet-filter default permit interzone trust dmz direction outbound
firewall packet-filter default permit interzone untrust dmz direction inbound
ospf
area 0
network 192.168.100.0 0.0.0.255
network 10.0.0.0 0.0.0.255
quit
quit
rip
version 2
network 200.0.10.0
（将外网rip注入到ospf）
ospf
import-route rip
（nat配置）
nat address-group 1 200.0.10.10 200.0.10.20
nat-policy interzone trust untrust outbound
policy 1
Policy source any
action source-nat
Address-group 1
（服务器静态nat）
nat server global 200.0.10.100 inside 192.168.100.1
（禁止10网段访问外网）
policy interzone trust untrust outbound
policy 0
policy source 10.0.0.0 mask 24
action deny
AR1-------------------------------------------
sys
int g0/0/0
ip add 192.168.1.254 24
int g0/0/1
ip add 10.0.0.1 24
quit
ospf
area 0
network 192.168.1.0 0.0.0.255
network 10.0.0.0 0.0.0.255
quit
quit
AR2-----------------------------------------
sys
int g0/0/0
ip add 200.0.10.2 24
int g0/0/1
ip add 200.0.20.254 24
quit
rip
version 2
network 200.0.10.0
network 200.0.20.0
验证：c1访问dmz区域
c1访问外网主机：
外网访问dmz：（dmzip经nat转换为外网地址）
外网不能访问内网
禁止10网段访问外网
