IRF配置思路[s1]irf member 1 renumber 1Ten-GigabitEthernet1/0/49Ten-GigabitEthernet1/0/50将两个接口down掉irf-po
.
IRF配置思路
[s1]irf member 1 renumber 1
Ten-GigabitEthernet1/0/49
Ten-GigabitEthernet1/0/50
将两个接口down掉
irf-port 1/2
port group interface Ten-GigabitEthernet1/0/49
port group interface Ten-GigabitEthernet1/0/50
[s1]irf-port-configuration active
将堆叠组激活。
[s2]irf member 1 renumber 2
save 一下
将s2重启
Ten-GigabitEthernet2/0/49
Ten-GigabitEthernet2/0/50
将两个接口down掉
irf-port 2/1
port group interface Ten-GigabitEthernet2/0/49
port group interface Ten-GigabitEthernet2/0/50
[s2]irf-port-configuration active
将堆叠组激活。
将接口
Ten-GigabitEthernet2/0/49
Ten-GigabitEthernet2/0/50
将两个接口 undo down掉
save 一下设备s2.
然后回到s1将
Ten-GigabitEthernet1/0/49
Ten-GigabitEthernet1/0/50
将两个接口 undo down掉.
这时s2就会重新启动。
设备堆叠就成功了。
