系统环境:REHL6.0版本:ntop5.0.1依赖环境yuminstallgccgdbmgdbm-develrrdtoolrrdtool-devellibtoollibpcaplibpcap-dev
.
系统环境:REHL6.0
版本:ntop5.0.1
依赖环境
yum install gcc gdbm gdbm-devel rrdtool rrdtool-devel libtool libpcap libpcap-devel subversion -y |
需要编译安装GeoIP-1.4.8、Python-2.7.4、setuptools-0.6c11、Mako-0.8.0、ntop5.0.1
1)GeoIP
tar zxvf GeoIP.tar.gzcd GeoIP-1.4.8/./configuremake && make install |
2)Python
tar zxvf Python-2.7.4.tgzcd Python-2.7.4./configure --enable-sharedmake && make installmake clean && make distclean |
3)setuptools
tar zxvf setuptools-0.6c11.tar.gzcd setuptools-0.6c11python setup.py buildpython setup.py install |
4)Mako
tar zxvf Mako-0.8.0.tar.gzcd Mako-0.8.0python setup.py buildpython setup.py install |
5)ntop
tar zxvf ntop-5.0.1.tar.gzcd ntop-5.0.1./autogen.sh --prefix=/usr/local/ntop --with-tcpwrapmake && make install |
=========================
配置
groupadd ntop //创建ntop组useradd -M -s /sbin/nologin -g ntop ntop //创建隶属于ntop组的用户ntopchown -R ntop.ntop /usr/local/ntop/share/ntop //修改ntop安装目录的拥有用户和组chown -R ntop.ntop /usr/local/ntop/var/ntop/ //修改ntop数据库目录的拥有用户和组cd /usr/local/ntop/bin./ntop -A //设定admin密码 |
启动ntop,添加至开机启动
/usr/local/ntop/bin/ntop -d -L -u ntop -P /usr/local/ntop/var/ntop --skip-version-check --use-syslog=daemon -w 3000echo "/usr/local/ntop/bin/ntop -d -L -u ntop -P /usr/local/ntop/var/ntop --skip-version-check --use-syslog=daemon -w 3000 > /dev/null 2>&1" >> /etc/rc.d/rc.local |
配置完成，运行ntop后，通过http://IP:3000就可以访问ntop的web界面了。
参考文章:http://www.linuxde.net/2013/03/13010.html
