LINUX终端下配置WPA2加密无线网络

生成配置文件模版wpa_passphrase <yourAPssid> <yourpassphrase> > /etc/wpa_supplicant/wpa_supplicant.conf参考下面的配

生成配置文件模版

wpa_passphrase <yourAPssid> <yourpassphrase> > /etc/wpa_supplicant/wpa_supplicant.conf

参考下面的配置将上面的配置补充完整

For WPA2-Personal

ctrl_interface=/var/run/wpa_supplicantctrl_interface_group=0ap_scan=1network={        ssid="my_network"        proto=RSN        key_mgmt=WPA-PSK        pairwise=CCMP TKIP        group=CCMP TKIP        psk="secret_password"}

配置关键点说明

network={ssid="Mywireless" 	#请非常注意你ssid名的大小写。proto=RSN 		#Robust Security Network:强健安全网络，表示这个网络配置比WEP模式要更安全。key_mgmt=WPA-PSK 	#请无论你是使用WPA-PSK，WPA2-PSK，都请在这里输入 WPA-PSK。这在wpa_supplicant看来WPA-PSK，WPA2-PSK都是 WPA-PSKpairwise=CCMP TKIP 	#关键点，wpa_supplicant目前还不认AES的加密标准group=CCMP TKIP 	#同上psk=7b271c9a7c8a6ac07d12403a1f0792d7d92b5957ff8dfd56481ced43ec6a6515 #wpa_supplicant算出来的加密密码。

手动应用配置

wpa_supplicant -B -i wlan0 -c /etc/wpa_supplicant/wpa_supplicant.confdhclient wlan0

将配置写入 /etc/network/interfaces (在debian 8.0 下测试通过，其他版本没有测试)

allow-hotplug wlan0iface wlan0 inet staticaddress 192.168.1.101netmask 255.255.255.0gateway 192.168.1.1pre-up wpa_supplicant -B -i wlan0 -c /etc/wpa_supplicant/wpa_supplicant.conf

参考文档

• http://blog.wp08.com/article/uncategorized/754.html
• http://www.360doc.com/content/12/0709/15/9424702_223191508.shtml